OCPI 2.3.0 Chapter 10

CDRs Module

Based on the OCPI 2.3.0 Specification. A Charge Detail Record is the description of a concluded charging session. The CDR is the only billing-relevant object. This module covers the CDR lifecycle, interfaces, object descriptions, and data types used for exchanging billing data between CPO and eMSP systems.

5 Sections

Sender & Receiver Interfaces

10.1 - 10.4

1. Overview

Introduction

Module Identifier

Property	Value
Module Identifier	`cdrs`
Data owner	`CPO`
Type	Functional Module

CDR Description

A Charge Detail Record is the description of a concluded charging session. The CDR is the only billing-relevant object. CDRs are sent from the CPO to the eMSP after the charging session has ended. Although there is no requirement to send CDRs in (semi-) realtime, it is seen as good practice to send them as soon as possible. But if there is an agreement between parties to send them, for example, once a month, that is also allowed by OCPI.

Data Owner

The CPO back-end system owns the CDR object and is responsible for creating and sending CDR data after a charging session has concluded.

Billing Purpose

CDRs are the only billing-relevant objects in OCPI. Once sent to the eMSP, they cannot be changed or replaced — only credited via a Credit CDR.

2. Flow and Lifecycle

10.1

CDRs are created by the CPO. They most likely will be sent only to the eMSP that needs to pay the bill of the underlying charging session. Because a CDR is for billing purposes, it cannot be changed or replaced once sent to the eMSP. Changes are simply not allowed. Instead, a Credit CDR can be sent.

CDRs may be sent for charging locations that have not been published via the Location module. This is typically for home chargers.

10.1.1. Credit CDRs

As CDRs are used for billing and can be seen as a kind of invoice, they cannot be deleted. Instead, they have to be credited.

Creating a Credit CDR

When a CPO wants to make changes to a CDR that was already sent to the eMSP, the CPO has to send a Credit CDR for the first CDR. This credit CDR SHALL have a different CDR.id which can be a completely different number, or it can be the id of the original CDR with something appended like for example: -C to make it unique again.

Credit CDR Fields

To indicate that a CDR is a Credit CDR, the credit field has to be set to true. The Credit CDR references the old CDR via the credit_reference_id field, which SHALL contain the id of the original CDR.

Credit CDR Content

The Credit CDR will contain all the data of the original CDR. Only the values in the total_cost field SHALL contain the negative amounts of the original CDR.

After Crediting

After having sent the Credit CDR, the CPO can send a new CDR with a new unique ID and the fields: credit and credit_reference_id omitted.

NOTE: How far back in time a CPO can send a Credit CDR is not defined by OCPI. It is up to the business contracts between the different parties involved, as there might be local laws involved etc.

10.1.2. Push Model

CDR Creation & Push

When the CPO creates CDR(s) they push them to the relevant eMSP by calling POST on the eMSP's CDRs endpoint with the newly created CDR(s). A CPO is not required to send all CDRs to all eMSPs, it is allowed to only send CDRs to the eMSP that a CDR is relevant to.

Validation Information

CDRs should contain enough information (dimensions) to allow the eMSP to validate the total cost. It is advised to send enough information to the eMSP so that they can calculate their own costs for billing their customers. An eMSP might have a very different contract/pricing model with their EV drivers than the tariff structure of the CPO.

Retrieving Posted CDRs

If the CPO, for any reason, wants to view a CDR it has posted to an eMSP's system, the CPO can retrieve the CDR by performing a GET request on the eMSP's CDRs endpoint at the URL returned in the response to the POST.

10.1.3. Pull Model

eMSPs who do not support the Push model need to call GET on the CPO's CDRs endpoint to receive a list of CDRs.

This GET can also be used in combination with the Push model to retrieve CDRs after the system (re-)connects to a CPO, to get a list of CDRs missed during a downtime of the eMSP's system.

A CPO is not required to return all known CDRs, the CPO is allowed to return only the CDRs that are relevant for the requesting eMSP.

3. Interfaces and Endpoints

10.2

There are both, a Sender and a Receiver interface for CDRs. Depending on business requirements, parties can decide to use the Sender Interface (Pull model), or the Receiver Interface (Push model), or both. Push is the preferred model to use, because the Receiver will receive CDRs in semi-realtime when they are created by the CPO.

10.2.1. Sender Interface

Typically implemented by market roles like: CPO.

The CDRs endpoint can be used to retrieve CDRs.

Endpoint structure definition:

Endpoint Structure

{cdr_endpoint_url}?[date_from={date_from}]&[date_to={date_to}]&[offset={offset}]&[limit={limit}]

Examples:

Example URLs

https://www.server.com/ocpi/cpo/2.2.1/cdrs/?date_from=2019-01-28T12:00:00&date_to=2019-01-29T12:00:00
https://ocpi.server.com/2.2.1/cdrs/?offset=50
https://www.server.com/ocpi/2.2.1/cdrs/?date_from=2019-01-29T12:00:00&limit=100
https://www.server.com/ocpi/cpo/2.2.1/cdrs/?offset=50&limit=100

Method	Description
`GET`	Fetch CDRs last updated (which in the current version of OCPI can only be the creation Date/Time) between the `date_from` and `date_to` (paginated).
`POST`	n/a
`PUT`	n/a
`PATCH`	n/a
`DELETE`	n/a

10.2.1.1. GET Method

Fetch CDRs from the CPO's system.

Request Parameters

If additional parameters: date_from and/or date_to are provided, only CDRs with last_updated between the given date_from (including) and date_to (excluding) will be returned. This request is paginated, it supports the pagination related URL parameters.

Parameter	Datatype	Required	Description
`date_from`	DateTime	no	Only return CDRs that have `last_updated` after or equal to this Date/Time (inclusive).
`date_to`	DateTime	no	Only return CDRs that have `last_updated` up to this Date/Time, but not including (exclusive).
`offset`	int	no	The offset of the first object returned. Default is 0.
`limit`	int	no	Maximum number of objects to GET.

Response Data

The endpoint returns a list of CDRs matching the given parameters in the GET request, the header will contain the pagination related headers.

Any older information that is not specified in the response is considered no longer valid. Each object must contain all required fields. Fields that are not specified may be considered as null values.

Datatype	Card.	Description
`CDR`	*	List of CDRs.

10.2.2. Receiver Interface

Typically implemented by market roles like: eMSP.

The CDRs endpoint can be used to create and retrieve CDRs.

Method	Description
`GET`	Retrieve an existing CDR.
`POST`	Send a new CDR.
`PUT`	n/a (CDRs cannot be replaced)
`PATCH`	n/a (CDRs cannot be updated)
`DELETE`	n/a (CDRs cannot be removed)

10.2.2.1. GET Method

Fetch CDRs from the receiver's system.

Endpoint structure definition:

No structure defined. This is open to the eMSP to define, the URL is provided to the CPO by the eMSP in the result of the POST request. Therefore, OCPI does not define variables.

Example:

Example URL

https://www.server.com/ocpi/2.2.1/cdrs/1234

Response URL

To retrieve an existing URL from the eMSP's system, the URL, returned in the response to a POST of a new CDR, has to be used.

Response Data

The endpoint returns the requested CDR, if it exists.

Datatype	Card.	Description
`CDR`	1	Requested CDR object.

10.2.2.2. POST Method

Creates a new CDR. The POST method should contain the full and final CDR object.

Endpoint structure definition:

Endpoint Structure

{cdr_endpoint_url}

Example:

Example URL

https://www.server.com/ocpi/2.2.1/cdrs/

Request Body

In the POST request the new CDR object is sent.

Type	Card.	Description
`CDR`	1	New CDR object.

Response Headers

The response should contain the URL to the just created CDR object in the eMSP's system.

HTTP Header	Datatype	Required	Description
`Location`	URL	yes	URL to the newly created CDR in the eMSP's system, can be used by the CPO system to perform a GET on the same CDR.

The eMSP returns the URL where the newly created CDR can be found. OCPI does not define a specific structure for this URL.

Example:

Response Location Header Example

https://www.server.com/ocpi/emsp/2.2.1/cdrs/123456

4. Object Description

10.3

10.3.1. CDR Object

The CDR object describes the charging session and its costs, how these costs are composed, etc.

CDR vs Session Object

The CDR object is different from the Session object. The Session object is dynamic as it reflects the current state of the charging session. The information is meant to be viewed by the driver while the charging session is ongoing.

Sealed Data

The CDR on the other hand can be thought of as sealed, preserving the information valid at the moment in time the underlying session was started. This is a requirement of the main use case for CDRs, namely invoicing. If e.g. a street is renamed the day after a session took place, the driver should be presented with the name valid at the time the session was started. This guarantees that the CDR will be recognized as correct by the driver and is not going to be contested.

The CDR object shall always contain information like Location, EVSE, Tariffs and Token as they were at the start of the charging session.

ChargingPeriod

A CPO SHALL at least start (and add) a ChargingPeriod every moment/event that has relevance for the total costs of a CDR. During a charging session, different parameters change all the time, like the amount of energy used, or the time of day. These changes can result in another Price Component of the Tariff becoming active. When another Price Component becomes active, the CPO SHALL add a new Charging Period with at least all the relevant information for the change to the other Price Component. The CPO is allowed to add more in-between Charging Periods to a CDR though.

Examples of additional Charging Periods that are required:

When energy changes in price after 17:00. The CPO has to start a new Charging Period at 17:00. The CPO also has to list the energy in kWh consumed until 17:00 in the Charging Period that ends at 17:00.

When the price of energy is higher when the EV is charging faster than 32A, a new Charging Period has to be added the moment the charging power goes over 32A. This may be a moment that is calculated by the CPO, as the Charge Point might not send the information to the CPO, but it can be interpolated by the CPO using the metering information before and after that moment.

step_size

When calculating the cost of a charging session, step_size SHALL only be taken into account once per session for the TariffDimensionType ENERGY and once for PARKING_TIME and TIME combined.

Charging to Parking Transition

step_size is not taken into account when switching time based paying for charging to paying for parking (charging has stopped but EV still connected).

Example: step_size for both charging (TIME) and parking is 5 minutes. After 21 minutes of charging, the EV is full but remains connected for 7 more minutes. The cost of charging will be calculated based on 21 minutes (not 25). The cost of parking will be calculated based on 10 minutes (step_size is 5).

Tariff Element Switching

step_size is not taken into account when switching from (for example) one ENERGY based tariff element to another. This is also true when switching from one TIME based tariff element to another TIME based tariff element, and one PARKING_TIME tariff element to another PARKING_TIME based tariff element.

Example: When charging is more expensive after 17:00. The step_size of the tariff before 17:00 will not be used when charging starts before 17:00 and ends after 17:00. Only the step_size of the tariff (PriceComponent) after 17:00 is taken into account, for the total of the same amount for the session.

Last ChargingPeriod

The step_size for the PriceComponent that is used to calculate the cost of such a 'last' ChargingPeriod SHALL be used. If the step_size differs for the different TariffElements, the step_size of the last relevant PriceComponent is used.

Tariff Switching

The step_size is not taken into account when switching between two Tariffs. Example: A driver selects a different Charging Preference profile_type during an ongoing charging session, the different profile might have a different tariff.

Total Amount Calculation

The step_size uses the total amount of a certain unit used during a session, not only the last ChargingPeriod. In other words, when the price of energy per kWh or the price of time per hour differs during a session, only the total amount of energy or time is used in calculations with step_size.

Example (Energy): Energy costs EUR 0.20 per kWh before 17:00 and EUR 0.27 per kWh after 17:00. Both Price Components have a step_size of 500 Wh. If a driver charges 4.3 kWh before 17:00 and 1.1 kWh after 17:00, a total of 5.4 kWh is charged. The step_size rounds this up to 5.5 kWh total. It does NOT round the energy used after 17:00 from 1.1 to 1.5 kWh.

Example (Time): Time costs EUR 5 per hour before 17:00 and EUR 7 per hour after 17:00. Both Price Components have a step_size of 10 minutes. If a driver charges 6 minutes before 17:00 and 22 minutes after 17:00, this makes a total of 28 minutes charging. The step_size rounds this up to 30 minutes total, so 24 minutes after 17:00 will be billed. It does NOT round the minutes after 17:00 to 30 minutes, which would have made a total of 36 minutes.

TIME and PARKING_TIME Combined

In the cases that TIME and PARKING_TIME Tariff Elements are both used, step_size is only taken into account for the total parking duration.

Example: Time spent charging costs EUR 1.00 per hour and time spent parking (not charging) costs EUR 2.00 per hour. Both Price Components have a step_size of 10 minutes. If a driver charges 21 minutes, and keeps his EV connected while it is full for another 16 minutes, then the step_size rounds the parking duration up to 20 minutes, making it a total of 41 minutes. Note that the charging duration is not rounded up, as it is followed by another time based period.

CDR Object Properties

Property	Type	Card.	Description
`country_code`	CiString(2)	1	ISO-3166 alpha-2 country code of the CPO that 'owns' this CDR.
`party_id`	CiString(3)	1	ID of the CPO that 'owns' this CDR (following the ISO-15118 standard).
`id`	CiString(39)	1	Uniquely identifies the CDR, the ID SHALL be unique per `country_code`/`party_id` combination. This field is longer than the usual 36 characters to allow for credit CDRs to have something appended to the original ID. Normal (non-credit) CDRs SHALL only have an ID with a maximum length of 36.
`start_date_time`	DateTime	1	Start timestamp of the charging session, or in-case of a reservation (before the start of a session) the start of the reservation.
`end_date_time`	DateTime	1	The timestamp when the session was completed/finished, charging might have finished before the session ends, for example: EV is full, but parking cost also has to be paid.
`booking_id`	CiString(36)	?	Unique ID of the Booking for which this CDR can also be sent. Is only allowed to be omitted when the Session was reserved.
`session_id`	CiString(36)	?	Unique ID of the Session for which this CDR is sent. Is only allowed to be omitted when the CPO has not implemented the Sessions module or this CDR is the result of a reservation that never became a charging session, thus no OCPI Session.
`cdr_token`	CdrToken	1	Token used to start this charging session, including all the relevant information to identify the unique token.
`auth_method`	AuthMethod	1	Method used for authentication. Multiple AuthMethods are possible during a charging session, for example when the session was started with a reservation: `ReserveNow`: `COMMAND`. When the driver arrives and starts charging using a Token that is whitelisted: `WHITELIST`. The last method SHALL be used in the CDR.
`authorization_reference`	CiString(36)	?	Reference to the authorization given by the eMSP. When the eMSP provided an `authorization_reference` in either: real-time authorization, StartSession or ReserveNow, this field SHALL contain the same value. When different `authorization_reference` values have been given by the eMSP that are relevant to this Session, the last given value SHALL be used here.
`cdr_location`	CdrLocation	1	Location where the charging session took place, including only the relevant EVSE and Connector.
`meter_id`	string(255)	?	Identification of the Meter inside the Charge Point.
`currency`	string(3)	1	Currency of the CDR in ISO 4217 Code.
`tariffs`	Tariff	*	List of relevant Tariffs. When relevant, a Free of Charge tariff should also be in this list, and point to a defined Free of Charge Tariff.
`charging_periods`	ChargingPeriod	+	List of Charging Periods that make up this charging session.
`signed_data`	SignedData	?	Signed data that belongs to this charging Session.
`total_cost`	Price	1	Total sum of all the costs of this transaction in the specified currency.
`total_fixed_cost`	Price	?	Total sum of all the fixed costs in the specified currency, except fixed price components of parking and reservation. The cost not depending on amount of time/energy used etc. Can contain costs like a start tariff.
`total_energy`	number	1	Total energy charged, in kWh.
`total_energy_cost`	Price	?	Total sum of all the cost of all the energy used, in the specified currency.
`total_time`	number	1	Total duration of the charging session (including the duration of charging and not charging), in hours.
`total_time_cost`	Price	?	Total sum of all the cost related to duration of charging during this transaction, in the specified currency.
`total_parking_time`	number	?	Total duration of the charging session where the EV was not charging (no energy was transferred between EVSE and EV), in hours.
`total_parking_cost`	Price	?	Total sum of all the cost related to parking of this transaction, including fixed price components, in the specified currency.
`total_reservation_cost`	Price	?	Total sum of all the cost related to a reservation of a Charge Point, including fixed price components, in the specified currency.
`remark`	string(255)	?	Optional remark, can be used to provide additional human readable information to the CDR, for example: reason why a transaction was stopped.
`invoice_reference_id`	CiString(39)	?	This field can be used to reference an invoice, that will later be sent for this CDR. Making it easier to link a CDR to a given invoice. Maybe even group CDRs that will be on the same invoice.
`credit`	boolean	?	When set to `true`, this is a Credit CDR, and the field `credit_reference_id` needs to be set as well.
`credit_reference_id`	CiString(39)	?	Is required to be set for a Credit CDR. This SHALL contain the `id` of the CDR for which this is a Credit CDR.
`home_charging_compensation`	boolean	?	When set to `true`, this CDR is for a charging session using the home charger of the EV Driver for which the energy cost needs to be financially compensated to the EV Driver.
`last_updated`	DateTime	1	Timestamp when this CDR was last updated (or created).

NOTE: The actual charging duration (energy being transferred between EVSE and EV) of a charging session can be calculated: total_charging_time = total_time - total_parking_time.

NOTE: Having both a credit and a credit_reference_id might seem redundant. But it is seen as an advantage as a boolean flag used in queries is much faster than simple string comparison of references.

NOTE: Different authorization_reference values might happen when for example a ReserveNow had a different authorization_reference than the value returned by a real-time authorization.

NOTE: When no start_date_time and/or end_date_time is known to the CPO, normally the CPO cannot send the CDR. If the MSP and CPO both agree that they accept CDRs that miss either or both the start_date_time and end_date_time, and local legislation allows billing of sessions where start_date_time and/or end_date_time are missing. Then, and only then, the CPO could send a CDR where the start_date_time and/or end_date_time are set to: 1970-1-1T00:00:00Z.

10.3.1.1. Example of a CDR

CDR Object Example

{
  "country_code": "BE",
  "party_id": "BEC",
  "id": "12345",
  "start_date_time": "2024-12-05T17:39:09Z",
  "end_date_time": "2024-12-05T19:37:32Z",
  "cdr_token": {
    "country_code": "DE",
    "party_id": "TNM",
    "uid": "012345678",
    "type": "RFID",
    "contract_id": "DE8ACC12E46L89"
  },
  "auth_method": "WHITELIST",
  "cdr_location": {
    "id": "LOC1",
    "name": "Gent Zuid",
    "address": "F.Rooseveltlaan 3A",
    "city": "Gent",
    "postal_code": "9000",
    "country": "BEL",
    "coordinates": {
      "latitude": "3.729944",
      "longitude": "51.047599"
    },
    "evse_uid": "3256",
    "evse_id": "BE*BEC*E041503003",
    "connector_id": "1",
    "connector_standard": "IEC_62196_T2",
    "connector_format": "SOCKET",
    "connector_power_type": "AC_1_PHASE"
  },
  "currency": "EUR",
  "tariffs": [{
    "country_code": "BE",
    "party_id": "BEC",
    "id": "12",
    "currency": "EUR",
    "elements": [{
      "price_components": [{
        "type": "TIME",
        "price": 2.00,
        "vat": 10.0,
        "step_size": 300
      }]
    }],
    "last_updated": "2024-05-02T14:15:01Z"
  }],
  "charging_periods": [{
    "start_date_time": "2024-12-05T17:39:09Z",
    "dimensions": [{
      "type": "TIME",
      "volume": 1.973
    }],
    "tariff_id": "12"
  }],
  "total_cost": {
    "before_taxes": 4.00,
    "taxes": [{
      "name": "VAT",
      "amount": 0.40
    }]
  },
  "total_energy": 15.342,
  "total_time": 1.973,
  "total_time_cost": {
    "before_taxes": 4.00,
    "taxes": [{
      "name": "VAT",
      "amount": 0.40
    }]
  },
  "last_updated": "2024-12-05T20:02:13Z"
}

5. Data Types

10.4

10.4.1. AuthMethod enum

Value	Description
`AUTH_REQUEST`	Authentication request has been sent to the eMSP.
`COMMAND`	Command like StartSession or ReserveNow used to start the Session, the Token provided in the Command was used as authorization.
`WHITELIST`	Whitelist used for authentication, no request to the eMSP has been performed.

10.4.2. CdrDimension class

Property	Type	Card.	Description
`type`	CdrDimensionType	1	Type of CDR dimension.
`volume`	number	1	Volume of the dimension consumed, measured according to the dimension type.

10.4.3. CdrDimensionType enum

This enumeration contains allowed values for CdrDimensions, which are used to define dimensions of ChargingPeriods in both CDRs and Sessions. Some of these values are not useful for CDRs, and SHALL therefore only be used in Sessions, these are marked in the column: Session Only.

Value	Session Only	Description
`CURRENT`	Y	Average charging current during this ChargingPeriod: defined in A (Ampere). When negative, the current is flowing from the EV to the grid.
`ENERGY`		Total amount of energy (dis-)charged during this ChargingPeriod: defined in kWh. When negative, more energy was feed into the grid then charged into the EV. Default step_size is 1.
`ENERGY_EXPORT`	Y	Total amount of energy feed back into the grid: defined in kWh.
`ENERGY_IMPORT`	Y	Total amount of energy charged, defined in kWh.
`MAX_CURRENT`		Sum of the maximum current over all phases, reached during this ChargingPeriod: defined in A (Ampere).
`MIN_CURRENT`		Sum of the minimum current over all phases, reached during this ChargingPeriod, when negative, current has flowed from the EV to the grid. Defined in A (Ampere).
`MAX_POWER`		Maximum power reached during this ChargingPeriod: defined in kW (Kilowatt).
`MIN_POWER`		Minimum power reached during this ChargingPeriod: defined in kW (Kilowatt), when negative, the power has flowed from the EV to the grid.
`PARKING_TIME`		Time during this ChargingPeriod not charging: defined in hours, default step_size multiplier is 1 second.
`POWER`	Y	Average power during this ChargingPeriod: defined in kW (Kilowatt). When negative, the power is flowing from the EV to the grid.
`RESERVATION_TIME`		Time during this ChargingPeriod Charge Point has been reserved, defined in hours, default step_size multiplier is 1 second.
`RESERVATION_EXPIRES`		Time during this ChargingPeriod Charge Point has been reserved and not yet been in use for this customer: defined in hours, default step_size multiplier is 1 second.
`RESERVATION_OVERTIME`		Time after the reservation during a ChargingPeriod that the session continues after the reserved time slot, defined in hours, default step_size multiplier is 1 second.
`STATE_OF_CHARGE`	Y	Current state of charge of the EV, in percentage, values allowed: 0 to 100. See note below.
`TIME`		Time charging during this ChargingPeriod: defined in hours, default step_size multiplier is 1 second.

NOTE: OCPI makes it possible to provide SoC in the Session object. This information can be useful to show the current State of Charge to an EV driver during charging. Implementers should be aware that SoC is only available at some DC Chargers. Which is currently a small amount of the total amount of Charge Points. Of these DC Chargers, only a small percentage currently provides SoC via OCPP to the CPO. Then there is also the question if SoC is allowed to be provided to third-parties as it can be seen as privacy-sensitive information. So if an implementer wants to show SoC in, for example an App, care should be taken, to make the App work without SoC, as this will probably not always be available.

10.4.4. CdrLocation class

The CdrLocation class contains only the relevant information from the Location object that is needed in a CDR.

Property	Type	Card.	Description
`id`	CiString(36)	1	Uniquely identifies the location within the CPO's platform (and suboperator platforms). This field can never be changed, modified or renamed.
`name`	string(255)	?	Display name of the location.
`address`	string(45)	1	Street/block name and house number if available.
`city`	string(45)	1	City or town.
`postal_code`	string(10)	?	Postal code of the location, may only be omitted when the location has no postal code: in some countries charging locations at highways don't have postal codes.
`state`	string(20)	?	State only to be used when relevant.
`country`	string(3)	1	ISO 3166-1 alpha-3 code for the country of this location.
`coordinates`	GeoLocation	1	Coordinates of the location.
`evse_uid`	CiString(36)	1	Uniquely identifies the EVSE within the CPO's platform (and suboperator platforms). For example a database unique ID or the actual EVSE ID. This field can never be changed, modified or renamed. This is the technical identification of the EVSE, not to be used as human readable identification, use the field: `evse_id` for that. Allowed to be set to: `#NA` when this CDR is created for a reservation that never resulted in a charging session.
`evse_id`	CiString(48)	1	Compliant with the following specification for EVSE ID from "E-mobility ID-codes: the purpose of IDs, ID usage and ID format". Allowed to be set to: `#NA` when this CDR is created for a reservation that never resulted in a charging session.
`connector_id`	CiString(36)	1	Identifier of the connector within the EVSE. Allowed to be set to: `#NA` when this CDR is created for a reservation that never resulted in a charging session.
`connector_standard`	ConnectorType	1	The standard of the installed connector. When this CDR is created for a reservation that never resulted in a charging session, this field can be set to any value and should be ignored by the Receiver.
`connector_format`	ConnectorFormat	1	The format (socket/cable) of the installed connector. When this CDR is created for a reservation that never resulted in a charging session, this field can be set to any value and should be ignored by the Receiver.
`connector_power_type`	PowerType	1	When this CDR is created for a reservation that never resulted in a charging session, this field can be set to any value and should be ignored by the Receiver.

10.4.5. CdrToken class

Property	Type	Card.	Description
`country_code`	CiString(2)	1	ISO-3166 alpha-2 country code of the MSP that 'owns' this Token.
`party_id`	CiString(3)	1	ID of the eMSP that 'owns' this Token (following the ISO-15118 standard).
`uid`	CiString(36)	1	Unique ID by which this Token can be identified. This is the field used by the CPO's system (RFID reader on the Charge Point) to identify this token. Currently, in most cases: `type=RFID`, this is the RFID hidden ID as read by the RFID reader, but that is not a requirement. If this is a `type=APP_USER` Token, it will be a unique, by the eMSP, generated ID.
`type`	TokenType	1	Type of the token.
`contract_id`	CiString(36)	1	Uniquely identifies the EV driver contract token within the eMSP's platform (and suboperator platforms). Recommended to follow the specification for eMA ID from "E-mobility ID-codes: the purpose of IDs, ID usage and ID format".

10.4.6. ChargingPeriod class

A Charging Period consists of a start timestamp and a list of possible values that influence this period, for example: amount of energy charged this period, maximum current during this period etc.

Property	Type	Card.	Description
`start_date_time`	DateTime	1	Start timestamp of the charging period. A period ends when the next period starts. The last period ends when the session ends.
`dimensions`	CdrDimension	+	List of relevant values for this charging period.
`tariff_id`	CiString(36)	?	Unique identifier of the Tariff that is relevant for this Charging Period. If not provided, no Tariff is relevant during this period.

10.4.7. SignedData class

This class contains all the information of the signed data. Which encoding method is used, if needed, the public key and a list of signed values.

Property	Type	Card.	Description
`encoding_method`	CiString(36)	1	The name of the encoding used in the SignedData field. This is the name given to the encoding by a company or group of companies. See note below.
`encoding_method_version`	int	?	Version of the EncodingMethod (when applicable).
`public_key`	string(512)	?	Public key used to sign the data, base64 encoded.
`signed_values`	SignedValue	+	One or more signed values.
`url`	string(512)	?	URL that can be shown to an EV driver. This URL gives the EV driver the possibility to check the signed data from a charging session.

NOTE: For the German Eichrecht, different solutions are used, all have (somewhat) different encodings. Below the table with known implementations and the contact information for more information.

Name	Description
`OCMF`	Proposed by SAFE
`Alfen Eichrecht`	Alfen Eichrecht encoding / implementation.
`EDL40 E-Mobility Extension`	eBee smart technologies implementation
`EDL40 Mennekes`	Mennekes implementation

10.4.8. SignedValue class

This class contains the signed and the plain/unsigned data. By decoding the data, the receiver can check if the content has not been altered.

Property	Type	Card.	Description
`nature`	CiString(32)	1	Nature of the value, in other words, the event this value belongs to. Possible values at moment of writing: Start (value at the start of the Session), End (signed value at the end of the Session), Intermediate (signed values taken during the Session, after Start, before End). Others might be added later.
`plain_data`	string(512)	1	The un-encoded string of data. The format of the content depends on the EncodingMethod field.
`signed_data`	string(5000)	1	Blob of signed data, base64 encoded. The format of the content depends on the EncodingMethod field.